24/7 Repair Service available

You ‘d be ideal to be worried about security with your wireless garage door opener and remote. A trespasser can get to your garage contents, or even your home if you do not follow some easy security actions.

 

Different radio frequencies are used for interaction between the remote and the opener. Tiny changes called dip switches are used to adjust the frequency used between the 2. It is a sensible concept to reconfigure the dip switch settings to make sure your garage more safe and secure.

 

A dip switch is a little block of plastic about the size of a dice cut in half. They are typically colored blue or red with 8 to 10 tiny white switch levers positioned up or down. Just when the up/ down switch patterns match on both gadgets will your garage door opener remote control have the ability to interact with the opener unit. By adjusting the switch pattern, you are changing the radio frequency used to communicate in between the 2.

 

You need to have the ability to quickly locate the dip switch on the opener and on the remote-control remote control. But to get access to the dip turn on the remote you may require opening it up if the dip switch isn’t discovered in the battery compartment. Get rid of the screws holding the remote together, or carefully pry it apart if there are no screws. When you have access to the dip turn on the remote, scramble the switch positions, and then match the positions on the openers dip switch block. It does not matter what the pattern looks like, so long as it’s a random pattern that would be tough for somebody to guess.

 

If you have difficulty getting the remote to work after doing this, verify that the dip switch patterns are the very same on both systems. Then examine the remote battery is in good condition, and as typical, make certain the opener has power, and operates typically using the control board inside your garage. If all else stops working, you might have to read the manual.

 

If you are considering getting a brand-new garage door opener or have actually already gotten one, then you will wish to change settings, just to ensure everybody is truthful. Do not forget, your installer or anyone working with him knows your frequency switch settings unless you alter them. So proceed and blend the switch pattern settings and test that it works.

 

Even if you are a garage door opener installation do-it-yourself type, you’ll want to make the exact same modifications. Don’t just stick with the factory default settings. If you did, then anyone might simply drive down your street with a suitable remote up until he finds a door that gives and opens access to your home. Make sure that’s not you.

 

This recommend also uses to anybody buying or leasing a new home too. Similar to you might change the lock to ensure there are no extra keys drifting around that might compromise your home security. You have no method of understanding the number of previous residences there might have been. And you wouldn’t want somebody to just walk right into your garage or house.

 

Contact us for any of your garage door repair or service needs.

Previous Next
Close
Test Caption
Test Description goes like this